Skip to content

Watch Guide for organisers

Make your next watch fair more engaging — and easier to measure.

Give visitors a branded mobile guide, help exhibitors turn interest into meaningful follow-up, and get the numbers to demonstrate your event’s value to brands and sponsors.

Works alongside your existing website and ticketing. No app-store download. Try the interactive demo.

The WatchIt! Watch Fair organiser analytics dashboard showing total users, QR check-ins, page views, brand opt-ins, giveaway entries and sponsor check-ins

The organiser dashboard at WatchIt! Watch Fair, and the guide on a visitor’s phone at The Manchester Watch Show.

The Manchester Watch Show app Explore screen in black and tan, with the sponsor and premium exhibitors listed

Proof

Built for real watch events. Proven on the show floor.

Watch Guide has run at two very different shows. Here is what each one recorded, with every figure defined as it was measured.

A visitor holding up a phone to check in at a brand stand at WatchIt! Watch Fair

WatchIt! Watch Fair

  • 89.5%visitor adoption: the share of visitors who used the app on event day
  • 100%of exhibitors received measurable digital engagement
  • 80.8%of exhibitors received at least one follow-up opt-in
Read the WatchIt! case study
A visitor checking in on their phone at a stand at The Manchester Watch Show, with the stand’s QR code on the table

The Manchester Watch Show

  • 407app users from 930 attendees (43.8%), with QR codes around the venue as the way in
  • 2,302stand check-ins across the show
  • 57exhibitors across a three-floor show
Read the Manchester case study

These are results from two events, not a forecast for yours. Adoption depends partly on pre-event promotion, venue signage, exhibitor participation and incentives. Manchester’s figure uses the organiser’s attendance count of 930. Measurable digital engagement includes profile views, QR check-ins, saves, shortlists, visitor notes and consent-based follow-up opt-ins.

Want to see what Watch Guide would record at your show?

Enquire about your event

What it does for your show

More than a digital show guide.

A watch fair has to get four things right: visitors who engage, exhibitors who see value, sponsors worth renewing, and numbers you can trust afterwards.

01 Visitors

Give visitors a reason to engage.

A printed list tells visitors who is at the show. Watch Guide gives them something to do about it. Every exhibitor has a profile with an introduction and conversation starters, every stand has a QR code to check in, and visitors save brands, make notes and work through challenges as they go.

  • Exhibitor profiles with conversation starters
  • QR check-in at every stand
  • Saved brands and personal notes
  • Challenges and giveaway entries, where you choose to run them
See the visitor experience
The WatchIt! Watch Fair app home screen on a phone, showing challenge progress, scan, explore and my day
The home screen at WatchIt! Watch Fair: challenge progress, scan, explore and My Day.

02 Exhibitors

Give exhibitors measurable value.

Brands pay for their tables, their travel and their time. Watch Guide gives each of them its own report: profile views, stand check-ins, saves and shortlists, and the visitors who explicitly asked to hear from them.

Exhibitors who can see what a show delivered are easier to talk to about next year, and you have something concrete to point to when you ask them to rebook.

See what exhibitors receive
An exhibitor report showing a brand’s stand check-ins, page views and follow-up requests against the event average, with the visitors’ names and emails blurred

The email each brand receives, and the report it opens. Visitor details are blurred in this example.

The Explore screen of the WatchIt! app, with premium sponsors featured at the top of the exhibitor list
Premium sponsors lead the exhibitor list, WatchIt! Watch Fair.

03 Sponsors

Sponsors want more than a logo on a page. Watch Guide can put them at the top of the exhibitor list, include them in your challenge, and give you check-in numbers afterwards that you can put in front of them.

2.3×

more check-ins per brand for premium sponsors than non-sponsor exhibitors at WatchIt!

WatchIt! Watch Fair only. Premium sponsors were featured at the top of the exhibitor list. Results at other events will vary.

In the app
Featured placement at the top of the exhibitor list, and a premium brand profile.
On the floor
A place in the challenge or passport, and sponsored giveaway prizes.
After the show
QR check-in reporting, follow-up interest and a sponsor insight report.
Talk to us about sponsor packages

04 Your report

Understand what actually happened.

After the show you receive an organiser report covering visitor adoption, engagement, exhibitor coverage, sponsor performance and challenge participation. It is privacy-safe: it reports counts and patterns, not named visitors, so you can share it with sponsors and exhibitors with confidence.

Analytics also export to CSV, so the numbers can go straight into your own post-event review.

The WatchIt! Watch Fair admin analytics dashboard with total users, check-ins, page views, average brands scanned, brand opt-ins, giveaway entries, sponsor check-ins and a page-views table
The WatchIt! Watch Fair admin analytics, with the event’s own figures.

Try it yourself

See what your visitors would see.

This is the visitor experience, running in your browser. Open a brand, shortlist a few, and look at the challenge. At your show it would carry your branding, your exhibitors and your table plan.

A demonstration with example brands from the Watch Guide catalogue. Nothing you tap is saved or sent.

Like what you see? Enquire about your event

Example brands, nothing saved. Open full screen

What you and your exhibitors receive

One event. Useful data for everyone.

You get the view of the whole show. Every exhibitor gets the view of their own stand. Both come from the same event, and both are ready to share.

Report 1 For the organiser

Your organiser report

The organiser analytics dashboard: total users, check-ins, page views, brand opt-ins, giveaway entries and sponsor check-ins
  • Visitor adoption
  • Total QR interactions
  • Engagement patterns
  • Exhibitor coverage
  • Sponsor performance
  • Challenge participation
  • Follow-up interest totals

Report 2 For each exhibitor

An individual exhibitor report

An individual exhibitor report: results at a glance, comparison with the event average and the visitors who asked to hear from the brand, with personal details blurred
  • Profile views
  • Stand check-ins
  • Saves and shortlist activity
  • Comparison against event averages
  • Explicit, consent-based follow-up requests
  • Exportable contact details where permission has been given

Screenshots are from WatchIt! Watch Fair. Visitor details are blurred. An exhibitor only receives contact details for visitors who chose to share them with that brand.

Simple setup

You run the event. We handle the digital experience.

Watch Guide is a managed event experience, not another platform for your team to learn. You send the details. We build it, run it and report back.

  1. You do

    Share your event details

    Exhibitors, logos, floor plan, sponsors and event information.

  2. We do

    We build your branded guide

    We configure profiles, navigation, QR codes and the engagement features you choose.

  3. Visitors do

    Visitors use it on the day

    No app-store download. Visitors arrive by QR code, in an experience made for your event.

  4. We deliver

    You receive your reports

    You get the organiser report, and each exhibitor is emailed their own results.

Visitor adoption

Getting visitors to use it matters.

Watch Guide only works if visitors know it exists and have a good reason to open it. The software cannot do that alone, so it is worth planning how the guide reaches people on the day.

Before the day
Mention the guide in your pre-event emails and posts, and share its link or QR code where you can, so visitors arrive knowing it exists.
At the doors
Put QR codes at the entrances and across the venue, so the way in is always one scan away.
On the stands
Brief exhibitors to point visitors at their QR code. One WatchIt! exhibitor called it “an excuse to start a conversation”.
Through the day
Where it suits your show, run a passport challenge or giveaway. It gives visitors a reason to keep moving from stand to stand.
All day
Make it useful in its own right: a table plan that is always current, and a directory that helps visitors find who they came to see.

Adoption was 89.5% at WatchIt! and 43.8% at The Manchester Watch Show. Both are real results and neither is a promise. Yours will depend on your promotion, venue signage, exhibitor support and incentives.

Talk to us about your show-day plan
A visitor holding up a phone showing the Manchester Watch Show welcome screen, beside a stand’s QR code
A QR code at a stand opens the guide, The Manchester Watch Show.

Pricing and setup

A smarter event experience, without a complicated setup.

Watch Guide is a ready-to-run event app for watch fairs, collector shows and horology events. We set it up around your event, and you and every exhibitor receive a report afterwards.

From £1,000

Depending on event size, setup requirements and sponsor features.

Enquire about your event

What’s included as standard

  • Branded event experience app
  • Exhibitor profiles
  • Digital show guide
  • QR stand check-ins
  • Saved brands and visitor notes
  • Challenge or giveaway mechanic
  • Consent-based follow-up interest
  • Basic sponsor visibility
  • Privacy-safe event report, plus a report emailed to every brand

Questions organisers ask

Frequently asked questions

Something else on your mind? Send us a message and we will answer it directly.

Does Watch Guide replace my website or ticketing system?

No. It sits alongside them. Visitors still find out about the show and buy tickets where they do now. Watch Guide is the guide they use once they are at the venue, so there is nothing to migrate and nothing to switch off.

How much work is involved in setting up an event?

Very little. You send us the list of brands, a table plan if you have one, and any details visitors should know for the show information section, such as timings, venue and giveaway details. We build and configure the branded guide around it. We then send you the QR codes, and your job on the day is to print and distribute them. Your effort goes into telling visitors about it, not into learning software.

How far ahead do we need to start?

Less time than you might expect. Setup can realistically be done as late as the days before your event, because all we need from you is the exhibitor list, table plan and show details, and all you need to do afterwards is print and distribute the QR codes we send. Starting earlier gives you more time to tell visitors about the guide before they arrive, which helps adoption.

What do you need from exhibitors?

Very little. You send us the list of brands, with logos where you have them, and we prepare each exhibitor’s profile and stand information. Exhibitors themselves only need to display their QR code on the stand. The one thing you do need to do is brief them on why scanning matters. Every scan is what produces a brand’s data, so the more visitors they encourage to scan, the better their report will be, and the better your event report will be too. Exhibitors who understand that will actively point visitors at the QR code, which is one of the biggest drivers of adoption. Afterwards each brand is emailed its own report, so there is no login to set up and nothing to chase.

What if the venue has poor signal?

Watch Guide runs in the browser, so visitors need a connection to open it, either mobile signal or venue wifi. Once they are in, their progress is saved on their phone and any changes wait in a queue, then send when the connection returns, so a patchy signal does not lose their check-ins. If your venue is known for weak coverage, tell us when you enquire.

Who is responsible for visitor data?

Watch Guide’s privacy policy covers what visitors enter in the app. Your organiser report contains counts and patterns, not named visitors. You only receive personal details for people who enter a giveaway, so you can check and contact winners, and you may contact visitors who tick the box to hear from the event. Anything you receive is your responsibility under your own privacy notice, so check that it covers this. Brands receive a visitor’s name and email only if that visitor chose to share them with that brand.

How do we encourage visitors to use it?

Mention it before the day, put QR codes at the entrances and around the venue, and brief exhibitors to point people at their stands. Where it suits your show, a passport challenge or giveaway gives visitors a reason to keep going. The adoption section above sets this out in more detail, and we are happy to talk through the plan for your venue.

Does it work without a giveaway?

Yes. The guide, exhibitor profiles, stand check-ins, saved brands, notes and reports do not depend on a giveaway. A challenge or giveaway is an optional extra that gives visitors another reason to explore, and you decide whether it suits your show.

What reports do we receive afterwards?

You receive a privacy-safe organiser report covering visitor adoption, engagement, exhibitor coverage, QR check-ins, saved brands, challenge participation, sponsor performance and follow-up interest. Each exhibitor is also emailed their own report. Analytics export to CSV.

What information can exhibitors access?

Each brand sees its own results, set against the event average: stand check-ins, brand profile views, saves and shortlists, and how many visitors left a private note. They also see the name and email of any visitor who explicitly chose to share their details with that brand, and can download those as a CSV. A check-in on its own does not reveal who the visitor is.

Can we offer additional benefits to sponsors?

Yes. Sponsors can have featured placement at the top of the exhibitor list, a premium brand profile, a place in your challenge, sponsored giveaway prizes and a sponsor insight report afterwards. At WatchIt!, premium sponsors recorded 2.3× the check-ins per brand of non-sponsors. Results at other events will vary.

Can Watch Guide be branded to our event?

Yes. Colours, logo, imagery, exhibitors and sponsor placements are all set up around your event. It can also run on your own domain or a subdomain, so it feels like part of the show.

Can it support smaller or international watch shows?

Yes. Watch Guide is built for watch fairs, collector shows and enthusiast-led events of different sizes, anywhere in the world. Tell us about your venue and how many exhibitors you expect, and we will confirm what is involved.

How much does it cost?

Watch Guide events start from £1,000, depending on event size, setup requirements and sponsor features. Tell us about your show and we will come back with a clear figure.

Get in touch

Give your next watch event a measurable advantage.

Tell us about your show and we’ll explore how Watch Guide can improve the experience for your visitors, exhibitors and sponsors.

  • Events from £1,000
  • No app-store download
  • Branded around your event

Built for watch fairs, collector shows and horology events.

Interested in Watch Guide for your event?

Tell us a little about your event and we will be in touch to discuss how Watch Guide can work for you.